Upholstery Class #5

Warning, photo overload.
I'm trying to document this all step by step as best I can. You know, so I can hopefully do it again one day and stuff. But there is soooo many steps. Hence the photo overload.
Anyway.
Fold the burlap over the arm, so it's not hanging out all scraggly.

Ooooops. Backtrack a bit. After a closer inspection the teacher has decided that the front roll is too low. It should be almost even with the highest part of the springs. Take it off and cut a strip of wood to nail underneath it.

Also, staple a piece of burlap over remaining holes along the side of the back. (Burlap is typically used so that cotton stays in place.)

Ok, now nail the wood strip and roll back in place and make a side roll for each side out of burlap and cotton. This creates a trough with the front and side rolls creating three sides and the springs creating the back side. Then stuff the trough with cotton so that it is flat from the front roll back to the springs.

Stuffed.

Then stuff the sides around the seat springs with cotton until the seat is flat.

The put two layers off cotton overlapping each other across the front and wrapping around the sides. Then pull the muslin, that is whip stitched to the seat, down tight and smooth and temporarily tack it in place across the front. This part has to be pretty, padded and smooth, because it is a visible section of the re-upholstery.

Cut a piece of 1" foam so that it overlaps under the sides and back by 1" on each side, then cover the whole seat with cotton. (Obviously missed a pic of this step) Then snip the muslin around the rails of the arms and pull it down through the back and sides, tight. Temporarily tack in place on the back first, then the sides.

Temporary tacks all around the sides.

And the back.

Then you go back to the front and remove the tacks. Pull everything down starting at the center, smooth and tight, and staple underneath. As I mentioned, the front part is visible, so the staples go underneath and the muslin is snipped and folded under neatly around each leg. Next, move to the back and pull the muslin tight and staple across the back, moving from the center to the sides. Staple the muslin in a straight line down from each arm stile, from this point back is not visible, so there is no cotton and the staples exist on the side and not underneath. Confused yet? I think I'm confusing myself.
ps. Who wants to buy me one of those sweet staple guns?

Squishy, smooth and pretty.

So I'm officially halfway through the class. Did I mention he told me I probably wouldn't finish it all in one session? And that I'm determined to come as close as possible? Must. Move. Faster!

It's pouring rain outside.

But I don't care. Nope. Not a bit.
This whole winter I've been dreading each time snow or rain would fall from the sky. We had a bit of a leaking issue you see. And installing insulation and drywall under a leaky roof is....well...high on the stupid chart. So obviously the situation had to be addressed. There was a lot of talk (mostly from my part) about tarping the roof. I even went to the trouble of buying one huge massive blue tarp. Classy right? "Can't take the country out of the girl", or whatever.
Anyway, what I'm trying to say is, we didn't do that.
We.
Got.
A.
New.
Roof.
Instead!
Woohoo!


We haggled, I mean, negotiated like champs and I think we got a pretty sweet deal. So there it is. A new EPDM rubber roof with brand new gutters and downspouts. These pics are of the addition roof only. Sorry, I didn't feel like climbing up again.

Kitchen Windows.

Months ago P's family came in town to give us a much much needed hand on the house. I seem to remember his brother saying something along the lines of, "that tar paper will be ok for about a week, but put in the windows as soon as you can", but my memory is not great, so I can't be sure. Well, if he did say that, whoopsies! What month is it? Oh, right, February. Almost March. We are real winners.
But look, we installed the windows!

After an iphone internet search to roughly figure out what we were doing we cut the tar paper in an upside down martini glass shape.

Folded the bottom in first and then the sides and secured everything with flashing tape. Then we secured a board on the outside so that the windows could be set into place and shimmed without falling.

We opted to use the existing crummy windows again, which do not have one of those handy nailing strips around the outside. So we had to build each window into a 1x6 frame that would sit in the rough openings as a whole unit.

Then everything was leveled and shimmed. Tight. Possibly too tight. We are trying to determine if the windows will be easy enough to open over a counter top. So they are probably 90% installed. Not a complete success, but they are in. We cut a continuous sill out of Aztek board that extends the length of both windows on the outside. I will try to add an updated picture of that later once everything is flashed and caulked...which might be tomorrow since the weather forecast says 100% chance of rain tomorrow. Yuck.

Can I tell you how much better this is to look at than tar paper? It's better.

The First Step.

It's admitting you have a problem, right?

Last Friday morning I peered out the window and to my crazy cluttered hoarding joy realized that our current upstairs neighbor had purged his apartment of years of junk. So like any completely sane and normal person I happily skipped toward the front door while simultaneously squealing something to P about chairs on the street. To his horror, not 15 minutes later, I had drug this through the front door.

In my defense I left the second chair on the street, and passed up our neighbor's offer to another chair in the basement. In case anyone's counting, this makes chair number three needing reupholstering. Totally normal.

No More Ducking.

I decided to break up our renovation fun from the long weekend into three posts...mostly because it was a relatively productive weekend for us lazy bums and I didn't want to jam all that into one post. We were able to accomplish most of the big ticket items on our list in preparation for our framing inspection next Monday. Yikes! I'll admit it, I'm a little nervous.
First up was the re-framing of the ceiling slope over the stairs. When we had the downstairs wall removed we opted to move the head height at the base of the stair back one joist bay. This allows P to walk down the stairs without ducking at the end...a true luxury.
After much debate and planning we decided that we wanted the plaster to transition from the vertical into the slant through a curve. Simple enough, right? Surrrrre.
The first step was to cut the flooring back to the joist that is now reinforced with a triple LVL beam. Check out that face of determination.

The next step is to forget to take any more pictures. Am I the only one that is tired of us doing that? In our defense, we were very busy "debating" the best way to go about this.

The final solution involved cutting the curve out of the wood using a jig saw and then terminating the angled pieces into the base plate of a wall.

The combination of moving the head height of the stair back and combining the front two rooms into one mega room created a bit of a problem at the corner. As in, check out that huge sloped thing in the corner. No big deal, we thought, we will make it a closet. P always pictured it as a built in piece of furniture type closet, but I always thought It'd be better to build an actual closet to be dry walled. You know, so there wouldn't be a big plaster triangle just hanging out in the corner. Although, I will admit, I had a few short daydreams about sliding down that triangle...in my spare time or whatever. Um, anyway, we decided building the wall would give the funky triangle a good termination point, so that's what we did. Doors will be added to the front later and P has some ideas about filling the negative space of the triangle in with some custom drawers. Works for me.

Right now it's a toss up between built in desk in the corner or a cozy little reading nook where I can spy on my neighbors. I'm leaning towards the creeper reading nook.

Upholstery Class #4

Week #4 left me feeling a little slow and unproductive. I'm hoping that it's just the waiting part that comes after I've finished a task and the teacher hasn't made it back to me yet...and not actually that I'm a slow poke.

I covered the inside back, sides and seat springs with burlap.

Next I stuffed the arms with cotton. I thought I had done it right and the teacher came over and laughed. Apparently you are supposed to really stuff it. I only had 1/4 of what was necessary. He said you want to stuff it until it's hard, this provides the base for the arm so that you never feel the wood when you rest your arm on the arm rest.

So then I really stuffed it. And stapled it down.

Finally I got to whip out the muslin and have my first turn on the sewing machine. The teacher did the first couple of passes and made it look sooooo easy. Then I got on the machine...and looked like a complete dummy. But, I finished it, without breaking the machine. Did I mention that this wasn't even my first time sewing? Total dummy. I think I need some practice.
Once the muslin cover is sewed you put it in place over the seat and whip stitch it down through the coils. Whip stitch? I think that's the right term. You use curved needles.

So I didn't finish stitching it down. Here's hoping tonight's class will be more productive!

Happy Making.

A good friend gave us a gift over a year ago that she knew we would love. And we did. Unfortunately, there was a recent event involving a tumble off a table that didn't end well for one of the little guys.

So we replaced it. And added two more to the collection. Love.